Enhance Your Music, Games and Movies With Xtreme Fidelity!
The Sound Blaster X-Fi XtremeMusic sound card harnesses the full power of the Creative X-Fi Xtreme Fidelity audio processor to Upgrade any existing library of MP3 or any music files to the Xtreme Fidelity audio standard. With the X-Fi Xtreme Fidelity 24-bit Crystalizer, MP3 music and movies are converted to Xtreme Fidelity, which delivers an experience beyond the original CD or DVD recordings. With the included Creative MediaSource™ 3 software suite, users can easily SuperRip™ all their digital music permanently to Xtreme Fidelity. In addition, MediaSource 3 also allows users to further enhance their music content with single-click access to rich features like X-Fi CMSS-3D, Smart Cross-Fade and Smart Volume Management. The Sound Blaster X-Fi XtremeMusic sound card plays back audio with rich 109dB SNR quality.

Technical Specs
24-bit Analog-to-Digital conversion of analog inputs at 96kHz sample rate
24-bit Digital-to-Analog conversion of digital sources at 96kHz to analog 7.1 speaker output
24-bit Digital-to-Analog conversion of stereo digital sources at 192kHz to stereo output
16-bit to 24-bit recording sampling rates: 8, 11.025, 16, 22.05, 24, 32, 44.1, 48 and 96kHz
ASIO 2.0 support at 16-bit/44.1kHz, 16-bit/48kHz, 24-bit/44.1kHz 24-bit/48kHz and 24-bit/96kHz with direct monitoring
Enhanced SoundFont support at up to 24-bit resolution
Audio Performance (Rated Output @ 2Vrms)
Signal-to-Noise Ratio (20kHz Low-pass filter, A-Weighted)
Stereo Output: 109dB
Front and Rear Channels: 109dB
Center, Subwoofer and Side Channels: 109dB
Total Harmonic Distortion + Noise at 1kHz (20kHz Low-pass filter) = 0.004%
Frequency Response (-3dB, 24-bit/96kHz input ) = <10Hz to 46kHz
Frequency Response (-3dB, 24-bit/192kHz input) = <10Hz to 88kHz (Stereo only)
Connectivity
FlexiJack (Performing a 3-in-1 function, Digital Out / Line In / Microphone) via 3.50mm mini jack
Line level out (Front / Rear / Center / Subwoofer / Rear Center) via 3.50mm mini jacks
AUX_IN line-level analog input via 4-pin Molex connector on card
One AD_Link (26 pin) connector for linking to the X-Fi I/O Console (upgrade option)
I/O Console Connectivity
Two RCA jacks for coaxial SPDIF input and output
Shared Auxiliary input / Phono input via RCA stereo jacks
Two optical connectors for optical SPDIF input and output
Two standard MIDI female connectors for MIDI input and output
Headphone output and volume control via 6.35 mm (1/4-inch) stereo jack
Shared line-level analog Line/Microphone input via 6.35 mm (1/4-inch) stereo jack
Shared line-level analog Line/Hi-Z input via 6.35 mm (1/4-inch) stereo jack
DIN jack to connect Creative analog speaker systems with the wired remote control or Audio Control Pod that comes with the speakers
One AD_LINK connector for linking to the audio card